4-04
11-01
PM
PM
03
Check how the assembly
4-04
/
11-01
fits on the parts of the hull that have
already been assembled. The upper
edge of part
4-04
should be flush
with the bow section of the hull (see
blue arrows) and there should not be
a gap where the upper sections of
the hull butt up against the section
of the hull below the waterline.
Using the
PM
screws supplied in
stage 04 and in this stage, join the
assembly
4-04
/
11-01
to the hull. The
positions of the five
PM
screws are
indicated by the blue lines.
Place one of the two support bases
11-04
on your work surface. Take the
bracket
11-02
and fit the pegs on the
lower edge into the two inner holes
of the base, as indicated. Note that
all supports have a front and a back,
as shown in the inset.
04
02.
ASSEMBLING THE SUPPORT STAND
11-02
11-04
01
12
12
AGORA
MODELS
13
AGORA
MODELS
