Hach TitraLab AT1102, Basic User Manual

Page: 8 / 158

Figure 4 Contents of the application box
1 Beakers (10 x 50 mL and 10 x 150 mL) 7 Syringe holding ring
5
2 Tube with anti-diffusion tip
2
8 Syringe (refer to Table 1 on page 6 for quantity)
3 Conical adapters (2x) 9 USB applications key
4 Magnetic stir bars (10x) 10 Glass bottles
6
5 Legacy sensor adapter
3
11 Bottle caps (2 x GL45 and 1 x GL25)
6 Sensor
4
12 Empty desiccant cartridges (3x)
Installation
C A U T I O N
Multiple hazards. Only qualified personnel must conduct the tasks described in this section of the
document.
The instrument is available in different configurations (refer to Table 1 on page 6). This manual
supplies instructions for the installation of an instrument with one syringe and one pump. Adjust the
installation procedure as applicable to accommodate the number of syringes and pumps in the
instrument.
Installation guidelines
• This instrument is for indoor use only.
• The power supply connector on the rear panel must be easily accessible so the power can be
disconnected quickly in case of emergency.
• Keep the instrument away from temperature extremes, including heaters, direct sunlight and other
heat sources.
5
1 for each syringe
2
If necessary for the application
6
Not in all application kits
3
Not in all application kits
4
Type and quantity depends on application
8 English