Hach TitraLab AT1000 Series, Basic User Manual

Page: 8 / 448

Figure 2 Contents of the application box
1 Beakers (5 x 50 mL and 5 x 150 mL) 7 Syringe holding ring (1 for each syringe)
2 Tube with anti-diffusion tip (if necessary for the
application) 8 Syringe (refer to Table 1 on page 6 for quantity)
3 Conical adapters (quantity depends on application) 9 USB applications key
4 Magnetic stir bars 10 Glass bottles (not in all application kits)
5 Legacy sensor adapter (not in all application kits) 11 Bottle caps (type and quantity depends on
application)
6 Sensor (type and quantity depends on application)
Installation
C A U T I O N
Multiple hazards. Only qualified personnel must conduct the tasks described in this section of the
document.
N O T I C E
This is a class A product. There may be potential difficulties in ensuring electromagnetic compatibility in other
environments, due to conducted as well as radiated disturbances. In a domestic environment this product may
cause radio interference in which case the user may be required to take adequate measures.
N O T I C E
Network and access point security is the responsibility of the customer that uses the wireless instrument. The
manufacturer will not be liable for any damages, inclusive however not limited to indirect, special, consequential
or incidental damages, that have been caused by a gap in, or breach of network security.
The instrument is available in different configurations (refer to Table 1 on page 6). This manual
supplies instructions for the installation of an instrument with one syringe and one pump. Adjust the
installation procedure as applicable to accommodate the number of syringes and pumps in the
instrument.
8 English