Hach sension6 Instruction Manual Download Page 8

Page: 8 / 86

CERTIFICATION,

continued

Additional immunity Standard/s include:

ENV 50204:1996 Radiated Electro-Magnetic Field from Digital
Telephones (Criteria B)

Emissions:

Instrument Tested with the Docking Station and external 230V,
50 Hz Battery Eliminator Power Supply:

Per

89/336/EEC

EMC:

EN 61326:1998

(Electrical Equipment

for measurement, control and laboratory use-EMC requirements)
Class “B” emission limits. Supporting test records by Criterion
Technology O.A.T.S. (NVLAP #0369), certified compliance by
Hach Company.

Standards include:

EN 61000-3-2 Harmonic Disturbances Caused by Electrical
Equipment

EN 61000-3-3 Voltage Fluctuation (Flicker) Disturbances
Caused by Electrical Equipment

Additional Emissions Standard/s include:

EN 55011 (CISPR 11)

, Class “B” emission limits

CANADIAN INTERFERENCE-CAUSING EQUIPMENT
REGULATION, IECS-003

: Class “A” emission limits.

Supporting test records by Criterion Technology O.A.T.S.
(NVLAP #0369), certified compliance by Hach Company.

This Class A digital apparatus meets all requirements of the
Canadian Interference- Causing Equipment Regulations.

Cet appareil numérique de la classe A respecte toutes les
exigences du Règlement sur le matériel brouilleur du Canada.

FCC PART 15

: Class “A” emission limits. Supporting test

records by Criterion Technology O.A.T.S. (NVLAP #0369),
certified compliance by Hach Company.

This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:

Summary of Contents for sension6






















































































Search results

Summary of Contents for sension6

Reviews:

Hach sension6, Instruction Manual, Page: 8 / 86

Search results

Summary of Contents for sension6

Reviews: