Hach sension6, Instruction Manual, Page: 35 / 86

34
SECTION 3,
continued
2. Press the up arrow seven times. An
8
will begin flashing in
the upper right hand corner of the display and the Date icon
will appear. The current date entry will be displayed at the
bottom of the display.
3. Press the
EXIT
key to leave the value unchanged. To change
the value, press the
READ ENTER
key. The number pad icon
will appear in the lower display.
4. Use the number keys to enter the date. Press the
READ ENTER
key after entering the desired date. Press the
EXIT
key. The
meter will return to the Reading mode.
3.1.9 Setting the Year
This feature is used to set the year in the instrument. To change
the value:
1. Access the setup mode by pressing the
SETUP/CE
key.
2. Press the up arrow eight times. A
9
will begin flashing in the
upper right hand corner of the display and the date icon will
appear. The current year entry will appear in the main display.
3. Press the
EXIT
key to leave the value unchanged. To change
the value, press the
READ ENTER
key. The number pad icon
will appear in the lower display.
4. Use the number keys to enter the year. Press the
READ ENTER
key and then the
EXIT
key when the desired year has been
entered. The meter will return to the Reading mode.
3.1.10 Automatic Data Transfer
This setup feature activates the meter’s automatic data transfer
(Print) function. The
sens
ion
™ Docking Station is required to
send data to a printer or computer via the RS232 connection.
The automatic data transfer function automatically sends data
through the docking station depending upon the time interval
selected. Time intervals are selected from the following options:
10 seconds, 30 seconds, 1 minute, 5 minutes, 20 minutes, 1 hour,
2 hours, or 6 hours.