Hach sensION3, Instruction Manual, Page: 40 / 52

40
SECTION 5,
continued
•
IBM PC/AT or compatible with a 386SX processor (16 MHz
or better)
•
4 megabytes of RAM
•
Hard disk drive with 2 megabytes or more of free space
•
3-1/2 inch, 1.44 megabyte floppy disk drive
•
VGA graphics with 640 x 480 or higher resolution, 16 or
more colors
•
Mouse or other pointing device
•
A 9-pin serial port (or 25-pin serial port with 9-pin adapter)
•
Windows 3.1 or later
•
DOS 3.3 or later
5.2 Sending Data to Printers/Computers
5.2.1 Sending Currently Displayed Data
To print or transfer a current reading:
1. Wait until the display is stable. Press
PRINT.
2. The word
PRINT
will be briefly displayed, then the meter
will return to Reading mode.
3. The print out for data that is printed without being stored will
not have a storage location number.
5.2.2 Sending Recalled Data Points
1. To transfer data, it must be recalled first. Press the
RECALL
key while in the Reading mode. See Section 4.2 on page 34
for more information.
2. When the desired sample data is displayed, press
PRINT
.
3. The word
PRINT
will be briefly displayed, then the meter
will return to Reading mode.