Hach sensION3, Instruction Manual, Page: 33 / 52

33
SECTION 4 STORING AND RECALLING DATA
4.1 Storing pH Measurements
The sens
ion
3
™
meter can store up to 99 measurement readings.
Data must be stored to recall it later for review, downloading, or
printing. Although the meter display will only show the
temperature, data location and pH/mV value, the following
information is stored (and can be downloaded or printed) for
each sample:
The new data is saved in the next available memory location,
numbered from 1 to 99. If no memory locations higher than the
current one are available, the meter will “wrap around” and
choose the next available location. The user also has the option of
choosing the storage location.
To store data:
1. Press
STORE
. The display will prompt
Store Sample #?
(# is
the next available location)
.
The question mark will
be flashing.
2. Press
ENTER
to store the measurement reading in that
location number. To store the data in another location, use the
arrow keys to scroll to another location or enter a location
using the number keys. Press
ENTER
.
Note: If all memory locations are full, the meter will prompt to overwrite a
data point by displaying
Erase Sample ##?
Press ENTER to replace
the data in that location with the current data. Press EXIT to return
to the previous screen without replacing the data.
3. The meter will store the reading and return to Reading mode.
•
storage location
•
mV reading
•
software version
•
sample temperature
•
date
•
pH value
•
time
•
instrument model and serial
number