Hach sensION3, Instruction Manual, Page: 26 / 52

26
SECTION 3,
continued
3.1.6 Setting the Time
1. From the reading mode, press
SETUP
.
2. The
Setup
icon and the number
1 (flashing)
will be displayed.
Press the up arrow until the Setup number is
6
.
3. Change the time by pressing
ENTER
. The main display will
change to
_ _:_ _,
with the left place holder flashing. The
numerical keypad will become active.
4. Press the desired number key for the left most digit. The
meter uses a 24-hour military clock (12 a.m. = 00:00; 1 p.m.
= 13:00). All four digit places must have a number. If the left-
most digit(s) is not necessary, use zero for the value (i.e.,
08:15 for 8:15 a.m. or 00:30 for 12:30 a.m.).
5. Once a number key is pressed, the next digit place holder will
flash. Continue to enter the desired numbers until all four
places have a value. Press
ENTER
. If a number entry error
occurs, start over by pressing
SETUP/CE
.
6. When the desired option is selected, press
EXIT
to return to
the reading mode.
3.1.7 Setting the Month and Day
1. From the reading mode, press
SETUP
.
2. The
Setup
icon and the number
1 (flashing)
will be displayed.
Press the up arrow until the Setup number is
7
. The display
will show
Date
and
a date
near the bottom of the display.
3. Change the date by pressing
ENTER
. The numeric display will
change to
_ _/_ _,
with the left place holder flashing. The date
format has two places for the month on the left side of the
slash and two places for the day of the month on the right side
of the slash.
4. The numerical keypad will become active. Press the desired
number key for the left most digit. All four digit places must
have a number. If the left-most digit is not necessary, use zero
for the value (i.e., 02/06 is February 6).