Hach sc1000, User Manual

Page: 44 / 64

44
Operation
Figure 41 List Box
Figure 42 Message window
5.1.4 Adjusting the Measured Value Display
The measured value display shows between 1 and 4 measured values simultaneously.
The values to be displayed are selected from the Measurement Value Display List
(see
section 5.1.3 on page 42 ) and can be values provided by sc sensors, relay status,
mA output values or input (mA or digital) values. To view values other than those visible on
the screen, use the scroll
UP
and
DOWN
keys on the pop-up toolbar. In normal operation
the display module displays the measured value from a connected and selected sensor
(refer to
section 5.1.4.1 on page 45 ).
To view several measured values:
1. Tap the bottom-left of the screen to display the pop-up toolbar.
2. Select the
2
or
4
button to view 2 or 4 values, respectively. To view more than 4 values
simultaneously, select the
LIST
button ( Figure 35 on page 40 ).
1. Scrolls up or down
2.
CANCEL
–cancels the selection
3.
ENTER
–confirms a selection
1. Scrolls up or down
2. Displays the messages or warnings
3. Displays the messages or warnings
4. Displays details on the selected entry
5.
ENTER
–confirms an entry
6.
CANCEL
–cancels an entry
mg/l
g/l
ppm
mE
E
m-1
FNU
NTU
1
2
3
5
6
2
COMMUNICATION ERROR
Ph [11f20030007]
1 3 4
客服：400 688 9809
网址：www.mamots.com 电话：0431-85178766