Hach sc1000, User Manual

Page: 52 / 64

52
Operation
5.5 Test/Maint Menu
The System Setup menu is dependent on the configuration of the system. The Service
Menu can include, depending on configuration, Datalog Setup, Check Cal/Hold,
Simulation, Output Setup, Current Inputs, Relay, Overfeed Reset, Network Modules,
Network Status, Display Information.
5.5.1 Datalog Setup
Datalog Setup
ERASE DATA/EVENT LOG
Select the device to delete from the data or event log.
5.5.2 Output Setup
mA Output INT—Choose probe module
FUNCTION TEST–Select Output 1–4
Test the outputs on the selected module.
STATUS OUTPUT–Select Status 1–4
Displays the status of the outputs on the selected module.
5.5.3 Current Inputs
mA Input INT—Choose probe module
FUNCTION TEST
Displays the status of the inputs on the selected model.
5.5.4 Relay
Relay Module—Choose probe module
RELAY STATUS
Displays the status of the outputs for the relay cards.
FUNCTION TEST
Tests the relays on the selected module.
5.5.5 Network Modules
Network Modules—Choose Network Module
STATUS—Displays the attached communication modules and automatically runs a status check
5.5.6 Display Info
Display Info
SOFTWARE VERSION
Displays the software version for the sc1000 display.
客服：400 688 9809
网址：www.mamots.com 电话：0431-85178766