Hach HIAC 9705, Operator'S Manual

Page: 12 / 84

12 of 82 Introduction - 9705
K
S
S
- Ma
rch
2
0
06
- Ed
itio
n 1
Operator Manual
HIAC
The 9705 can also be used with a Large Volume Adapter to sample from vessels greater than
125 mL. The adjustable height stand and stainless steel tube intake accommodate IV bags and
Large Volume Injectables (LVIs) and adds 0.054 mL tare volume per inch of tubing.
1.2
Operation Conventions
While the 9705 is most commonly used with PharmSpec to conduct compendial tests, some
9705 setup and display information is accessed by use of a TFT color touch screen located on
the front panel of the unit, shown in
Figure 1-1 . All commands may be executed through the
touch screen.
Items on the screen that need to be touched or pressed to invoke actions appear in bold text.
Buttons or tab names that should be pressed in sequence appear like this:
1) Press Settings icon > System icon to invoke the System screen.
Screen items commonly referred to in this manual include:
• A screen is a window of the Graphical User Interface (GUI) which takes all up all visible
space on the touch screen and can only be exited by pressing a button.
• A tab is a subdivision the GUI easily accessed by touching the tab at the top of the
screen.
• A button is an area of the touch screen that should be touched to invoke another screen
or execute an action (such as performing a sample run or clearing the buffer).
• A field indicates an area of the screen where strings of text and/or numbers may be
entered. To enter information in a field, touch the field. Depending on the nature of the
field (alphanumeric versus numeric), a keypad will appear on the touch screen to allow
text or numeric entries. Touch
OK to complete the entry.
• A checkbox allows functions to be toggled on or off. Touch the box to make a checkmark
appear and enable the function. Touch the box a second time to make a checkmark
disappear and disable the function.
• A dropdown menu allows operators to choose from a set list of values. Dropdown menus
can be identified by the arrow on the right side of the field. To use a dropdown menu,
touch the arrow to show the list, drag a finger down the list to show all items, then
highlight the desired item to select it.
• A pop-up box is a warning or note to make sure actions are taken as intended. Click OK
or Yes to continue or Cancel to stop.
1.3
Accessories
Several accessories are available which can be ordered from a local Hach Ultra representative
or from the factory by calling either a local representative or the factory at 800.866.7889 or
+1 541.472.6500 during the week from 6:00 a.m. to 4:30 p.m. PT.