Hach DR2400, Manual

Page: 61 / 66

Certification
Certification
5940018Cert.fm
Page 61
Canadian Interference-causing Equipment Regulation, IECS-003, Class A
Supporting test records by records Hewlett Packard, Ft. Collins, CO Hardware
Test Center (A2LA # 0905-01), certified compliance by Hach Company.
This Class A digital apparatus meets all requirements of the Canadian
Interference- Causing Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du
Règlement sur le matériel brouilleur du Canada.
FCC PART 15, Class “A” Limits
Supporting test records Hewlett Packard, Ft. Collins, CO Hardware Test Center
(A2LA # 0905-01), certified compliance by Hach Company.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference, in which case the user will be required to correct the
interference at his own expense. The following techniques of reducing the
interference problems are applied easily.
1. Disconnect the external power supply from the instrument to verify that the
meter is or is not the source of the interference.
2. Move the instrument and its power supply away from the device receiving
the interference.
3. Reposition the receiving antenna or the device receiving the interference.
4. Try combinations of the above.