Hach DR2400, Manual

Page: 23 / 66

General Instrument Operation
General Instrument Operation
5940018Operation.fm
Page 23
2.3.2 Setting the Sample ID
Use this option to enter up to 25 sample identification tags (up to 10 characters
each) into the instrument. Sample IDs can be used to identify the location where
each sample was taken. (See
Section 2.3 Using the Alphanumeric Keypad for more
information.)
2.3.3 Right- or Left-Handed Screen Option
The screen layout is adaptable for use by either a right- or left-handed person.
1. Enter the Instrument Setup menu.
2. Touch
Sample ID
.
3. Enter the sample ID. Touch
OK
.
Note: Spaces are not available in this function. Use underscore symbols instead.
Alternatively, if a sample ID has been entered and Sample ID is
active, touch the sample
ID directly on the Hach Program screen.
Use the alphanumeric keypad to change the sample ID.
1.
Enter the Instrument Setup menu.
2. Touch
Screen Layout
.
3.
Touch
Right-handed
or
Left-handed
. Touch
OK
.