Hach DR1300 FL, User Manual

Page: 14 / 176

Option Description
Update
Program For Service use only
Factory
Default Sets the system settings back to the factory default
settings.
Factory For Service use only
Exit Goes back to the previous menu.
Section 7 Do a test
D A N G E R
Chemical or biological hazards. If this instrument is used to monitor
a treatment process and/or chemical feed system for which there
are regulatory limits and monitoring requirements related to public
health, public safety, food or beverage manufacture or processing,
it is the responsibility of the user of this instrument to know and
abide by any applicable regulation and to have sufficient and
appropriate mechanisms in place for compliance with applicable
regulations in the event of malfunction of the instrument.
C A U T I O N
Chemical exposure hazard. Obey laboratory safety procedures and
wear all of the personal protective equipment appropriate to the
chemicals that are handled. Refer to the current safety data sheets
(MSDS/SDS) for safety protocols.
C A U T I O N
Chemical exposure hazard. Dispose of chemicals and wastes in
accordance with local, regional and national regulations.
To do a test for a specific parameter (e.g., total chlorine), download the
test procedure from the manufacturer's website. Refer to
Download a
test procedure on page 15.
The generic steps to do a test follow.
1. Push Enter to set the instrument to on. Keep the sample port cover
closed during startup.
2. Select TESTS , then select the parameter to measure.
14 English