Hach DR 3900, Basic User Manual

Page: 17 / 145

English 17
5. Select the data to be sent.
The following options are available:
• Single point : only this selected reading will be sent
• Filtered data : only readings that correspond to the set filters
will be sent
• All data : all data in the selected data category will be sent.
6. Press OK to confirm.
Note: The number in parentheses is the total number of data sets
assigned to this selection.
Stored Programs
1. Press Stored Programs in the Main Menu to view an alphabetical
list of stored programs with program numbers.
The "Stored Programs" list will appear.
2. Highlight the required test.
Hinweis: Select the program by name or scroll through the list
using the arrow keys. Highlight the program or press Select by No.
to search for a specific program number. Press OK to confirm.
3. Press Start to run the program. The respective measurement
window is displayed.
Hinweis: All corresponding data (wavelength, factors and
constants) is already preset.
4. Follow the instructions for chemical procedures in the relevant
procedures manual. Further information are available on the
website of the manufacturer.
Hinweis: To display the procedural instructions in the display, press
the info icon. Not all programs have this option.