Lorenz Hasenbach GmbH u. Co. KG · D-65517 Bad Camberg · Tel. 0049 6434 / 25-0 · www.haca.com
2
MA 5103 b-UK
MA 5103 b-UK
Teile-Nr. 01/0117000455
2.1 Assembly on two-rail lad-
ders Rest platform model
0529.1913/0929.1913
Stop the folding rest platform at the
desired height (see 2nd as
Fig. 3). Insert the screws with coun-
ter plate and spacer sleeve from the
front over the rung and through the
elongated holes (Fig. 1, 3 + 5). Cy-
linder screws are used in the upper
holes and bracket screws in the
lower holes.
When using a fall arrest rail, the
counter plate is not mounted (Fig. 4
+ 5a). The spacer sleeves must al-
ways be selected 1 mm smaller than
the rung width.
The rest platform is now screwed in
place by using the washers and nuts
supplied. The rest platform must be
aligned so that the foot rests are
horizontal.
Fig 3
Fig.4
Fig. 5 a
Bracket
screw
Washer
Counter plate
Spacer sleeve
Special HACA nut
Cylinder
screw
Washer
Spacer sleeve
Special HACA nut
Fig. 5
