Instructions for assembly and use
for the model types 0529.1913, 0929.1913, 0544.1913,
0944.1913 and 0643.1913
HACA – Folding rest platform
Lorenz Hasenbach GmbH u. Co. KG · D-65517 Bad Camberg · Tel. 0049 6434 / 25-0 · www.haca.com
Stand: 04-2021
1
MA 5103 b-UK
Teile-Nr. 01/0117000455
Please read before assembly!
Caution: Incorrect assembly can lead to a risk of death!
Please contact our head office in Bad Camberg,
if you have any queries regarding the assembly.
Deutsch
Fig. 1
1. General information
The HACA rest platform can be mounted on all fixed
HACA two-rail ladders as well as on all fixed HACA single-
rail ladders.
2. Assembly
The assembly can be carried out on any rung of the lad-
der. Depending on the version, the assembly accessories
include special HACA nuts with a grip coating. For identifi-
cation purposes, these should be mounted so that the
blue coating can be seen from the outside.
A tightening torque of 35 Nm applies to all screw con-
nections.
Pass the rest platform at the desired height behind the
ladder (Fig.2). Fold both platform gratings forward bet-
ween two rung sand lower the rest platform (Fig. 2a)
until the platform gratings rest on the rung (Fig. 2b).
Further assembly is described in the following points for
the different ladder types.
Fig. 2
Fig. 2a
Fig. 2b
