HAC-LBee/S manual V3.X SHENZHEN HAC TECHNOLOGY CO., LTD.
FAX:+86-755-23981007 E-MAIL
：
-
31 -
"COM Setup" page is used to setup the computer
’
s serial port. Only when the settings of serial port
are correct, the software can communicate with the module normally.
"AT Command" page is used to input and output AT Command.
"Range Test" is used for the communication test of module, it only can run under the API mode
(AP=1).
"Setup" is used to setup the module. But the most important is that some settings can affect the
working state and performance of the module. "Setup" only can run under the API mode (AP=1).
"Help" is the help for software. Before using the software, please read the
“
Help
”
at first.
