Fig.
20
Fig. 21
them together in C position, connect the other end of the tube to the water pool E position, and lock it
with the hose clamp. (See Fig. 18)
6.Install the plug (3) on D position. (See Fig. 18)
7.Turn on the power supply and select the desired position for operation.
Note: Do not set the control valve between the two functions, otherwise it will cause leakage.
Motor filter screen cleaning and maintenance
1.Ensure that the power wire is unplugged from the outlet.
2.Please plug the outlet of the water tank.
3.As shown in Fig. 21, counterclockwise unscrew the filter cartridge buckle (17) and remove the filter
screen (15) and the filter cartridge buckle seal (16).
4.Use a water hose to wash and clean the filter screen (15) and the filter cartridge buckle seal (16); if
necessary, use a plastic brush to scrub the impurities on the filter screen (15). Do not use a metal
brush.
5. Reinstall the filter screen (15), the filter cartridge buckle seal (16) and the filter cartridge buckle
(17) sequentially (Fig. 01).
NOTE: Must empty and regularly clean the filter. A dirty or blocked filter will reduce the performance
of sand filter pump.
Summary of Contents for 103109
Page 1: ...6DQG ILOWHU PDQXDO...
Page 3: ...List of parts in the package box Optical...
Page 4: ...LJ...
