Betriebs- & Wartungsanleitung
TS. 02.06.2020
Technik
Seite 13 von 26
©Copyright by Habegger Maschinenfabrik AG
Version 04 / 02.06.2020
3.2
Options
3.2.1
Safety gear
BLOCSTOP BS, hand operated
Safety gear BS
BS 15.301
BS 20.303
BS 20.301
BS 35.30
Suitable for manual hoist device
HIT-06
HIT-10
HIT-16
HIT-32
Load-bearing capability when transporting persons *
6 kN
8 kN
12 kN
24 kN
Rope D on the safety gear
8.3 mm
9.5 mm
11.5 mm
16.3 mm
* 1 kN corresponds to approximately 102 kg
While lifting a load or tensioning a wire rope the rope passes through the BLOCSTOP. There is no need to
operate the BLOCSTOP. For lowering the load or releasing the wire rope the BLOCSTOP is opened by lift-
ing the operating lever upwards.
Blocstop BSA, automatic slack wire rope device
Safety gear BSA
BSA 15.301
BSA 20.303
BSA 20.301
BSA 35.30
Suitable for manual hoist device
HIT-06
HIT-10
HIT-16
HIT-32
Load-bearing capability when transporting persons *
6 kN
8 kN
12 kN
24 kN
Rope D on the safety gear
8.3 mm
9.5 mm
11.5 mm
16.3 mm
* 1 kN corresponds to approximately 102 kg
The BLOCSTOP can only be used on a secondary safety wire rope in parallel with a main suspension wire
rope. The BLOCSTOP is rigidly mounted and operated by the tensioned suspension wire rope. This system
not only protects against suspension wire rope failure or hoist malfunction but also against excessive
slope of the cradle.
