Habasit PMR-07 General Manual Use And Maintenance Download Page 9 | Manualshive

Page: 9 / 68

Habasit PMR-07 General Manual Use And Maintenance Download Page 9

Habasit Italiana S.p.A.
Vittorio Veneto 31029 (TV)
Tel.: ++39(0)438.9113
Fax. ++39(0)438.200545

Regulating Unit PMR-07

Author:

A.T. / KM

REGULATIONS AND GENERAL WARNING NOTES

Edition: 04/2006

Page

A-3

Replaces: 10/2005

A.2

HOW THE MANUAL IS ORGANIZED

This regulating unit was designed, built and tested by expert technicians. The high quality
materials used to build the regulating unit make it operationally highly reliable.

For further, more detailed information or in regard to problems, please contact the following
address:

Habasit Italiana S.p.A.
Via A. Meucci 8
Zona Industriale
31029 VITTORIO VENETO (TV) - ITALY
Tel.: 0039.438.9113
Fax: 0039.438.200545

This manual observes the organizational rules and requirements of Directive 98/37/CE, duly
amended, being the Directive of the Council of the European Community of June 14, 1989,
concerning the reconciliation of the laws of member states regarding machines, also known as
the «Machine Directive», and also all the other Directives and Regulations referred to in the said
Machine Directive, inspired by criteria which, in addition to illustrating the technical
characteristics of the machine and its use, maintenance and troubleshooting methods, also
clearly indicate the following:

All the protection measures adopted on the regulating unit, fully integrating design safety
planning and construction safety.

All protection measures to be adopted to meet those risks that cannot be completely eliminated.

All indications for the training of personnel using the regulating unit, while indicating where it is
necessary to provide for individual safety protection devices.

The manual is divided up into sections. Each section deals with a specific subject in which every
aspect of safety is considered and clearly highlighted in the text.

Regulating Unit PMR-07

«
...
7
8
9
10
11
...
»

Summary of Contents for PMR-07





































































Reviews:

No comments