manualshive.com logo in svg

Habasit PMR-07, General Manual Use And Maintenance, Page: 24 / 68

Share
Download
Habasit PMR-07 General Manual Use And Maintenance Download Page 24

Habasit Italiana S.p.A. 
Vittorio Veneto 31029 (TV) 
Tel.: ++39(0)438.9113 
Fax. ++39(0)438.200545 

Regulating Unit PMR-07 

 

Author: 

A.T. / KM 

TECHNICAL SPECIFICATIONS

 

Edition: 04/2006 

Page 

B-6

 

Replaces: 10/2005 

 

 

B.4   

ORDERING ACCESSORIES/SPARE PARTS 

IMPORTANT 

To order accessories or spare parts, please do the following: 

Mention the name of the regulating unit. 
Mention the position of the part. 
Mention the description of the part. 
Mention the technical code. 

When making your request, briefly illustrate the causes of failure of the part being ordered, and 
provide all information which may be useful for understanding the malfunction; this will make it 
possible to pinpoint any shortcomings or incorrect procedures which may have caused the 
damage. 

When ordering spare parts, we recommend using the fax and not just placing your order by 
phone. 

 

Habasit Italiana S.p.A. 
Via A. Meucci 8 
Zona Industriale 
I - 31029 Vittorio Veneto 
Tel.: 0039.438.9113 
Fax: 0039.438.200545 
 

The parts marked P and N are available at the headquarters of Habasit Reinach, Switzerland. 

 

Regulating Unit PMR-07 

 

Summary of Contents for PMR-07





































































Reviews:

No comments