manualshive.com logo in svg

Haas TL Series, Training Manual

Share
Download
Haas TL Series Training Manual Download Page 81

ES0609      rev D     4/09

19

 

Chamfer

 – Enter the Z dimension of the chamfer desired. Entered value must be positive.

Angle

 – Enter the angle of the chamfer (0°–90°).  Entered value must be positive.

Depth of Cut

 – Enter the depth of cut for each pass of the stock removal.

Feed Per Re

v – Enter the feed per revolution.

MAX RPM 

– Enter the maximum spindle turning speed.

Tool Nose

 – Enter the tool nose radius.

SFM

 – Enter the Surface Feed per Minute.

Advanced Users:

 In the full CNC mode this is a G71 command.

Chamfer & Radius - ID Chamfer

This mode is used to cut an outside diameter chamfer.

Press <CYCLE START> to run

in MDI or <F4> to record

output to a program

OD RADIUS ID RADIUS OD CHAMFER ID CHAMFER

TOOL NUMBER

1

WORK OFFSET

54

Z START PT

0.0000 in

INSIDE DIA.

0.0000 in

CHAMFER

0.0000 in

0.000 deg.

0.0400 in

FEED PER REV

0.0060 in

TOOL NOSE

0.0315 in

ANGLE

DEPTH OF CUT

MAX RPM

1000

200

SFM

GROOVING

THREAD RE-CUT

THREADING

DRILL & TAP

MANUALSETUP

TURN & FACE

CHAMFER & RADIUS

Tool Number

 – Enter the tool to be used.

Work Offset

 – Enter the work offset to be used.

Z Start PT

 – Enter the Z axis starting point.

Inside Dia.

 – Enter current diameter of work piece (outside diameter of part). Manually measure work piece.

Summary of Contents for TL Series
















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands