1
Move the cross-slide approximately 10" (25 cm) away from the spindle. Move the cross-slide forward to get access to
the way cover.
Use the air hose to clean the table and the way cover.
Push
[POWER OFF]
.
Set the main circuit breaker to the OFF position. Lock the main circuit breaker. Use an approved lock with an
approved safety tag.
Disconnect the air supply.
Danger:
If the 320V Power Supply High voltage indicator light is on, do not touch the electrical components. The
high voltage in the control cabinet can kill you. Wait for the 320V Power Supply voltage indicator LED to go off fully.
TL-1/2 - ATT-4/8 Turret - Installation and Alignment - AD0304
Page 3 of 10 pages
