7
7.3. Using for the first time
7.3.1. General:
Before using for the first time
Remove any stickers.
Remove all accessories from the pellet tank and the
combustion chamber.
Check whether the combustion chamber cladding (see appliance sheet - combustion chamber
replacement part Figure 8a) is attached to its fastenings. This could have slipped out of its position as a
result of the transportation or installation of the stove.
Check that the burner fits perfectly in its mounting.
Close the combustion chamber door.
Fill the storage container with pellets
Plug in mains cable
Tip!!
Only
when
using for the first time
, place approx. 30 pellets in the burner. This speeds up the ignition process.
7.3.2. Operating console:
7.3.2.1. Software version
As soon as the mains plug is connected, the software version appears on the display for approx. 7 seconds,
e.g.:
Software HSP-6-V5.03
7.3.2.2. Language selection
After that you can select your required language.
Procedure:
The required language is selected with the
“Plus”
or
“Minus”
buttons and confirmed with
“OK”
.
7.3.2.3. Welcome page
￭
∓
28°C
23°C
off
on
menu
10:34
↱
↓
OK
>deutsch <
englisch
language
language
