14
Starting up
Please perform the following steps when using the device for the first time:
Remove all accessories from the ashpan and oven. Rub dry the enamelled
surfaces. Light a small fire so the fire bricks can dry slowly.
A slight smoke may come from the
stove besides the typical ‘new door‘ during
this phase. This is normal and will diminish after the first few times. For this case
ensure the sufficient ventilation of the room.
Combustibles
Using the proper and suggested fuels for the solid fuel stove ensures the
expected results and a diligent operation.
Be sure to use the fuels specified in the table and set the grill and air regulator
accordingly.
Wood logs length ca. 33-40 cm diameter ca. 6cm.
Fuel type:
max. amount of fuel per operation
brown coal briquettes
ca. 3 kg
firewood- air dry
ca.2 kg pro
installation
Removing ash and cinder
Before each fuel charging shake off and clean the grids. Use the enclosed
poker for it.
The ash box must be emptied daily (the cinder cones must not touch the
grill).
At least every three days cinder should be removed from the grid.
Do not pour burning embers in dustbins or open space.
The cleaning interval depends on the fuel used, the delivery pressure and
the operation mode. Indicators which show that cleaning is needed are for
example:
1. A decrease in the usual heating power
2. Poorly burning fire when air regulators are open and/or there is occasional
leakage of exhaust gases.
3. Smoke smells in the room
Emission control
By using the proper combustibles the requirements of the combustible firing
system regulations are met. Using waste, treated or painted wood and
especially plastics is prohibited! This does not only harm the environment but
damages the stove, connector and chimney.
