11
Air draught regulator
Height adjustment
The height of the stove can be adjusted
to other devices with the four adjusting
screws. Use a fork spanner SW 17 for
adjusting (not included in the delivery).
Pay attention when adjusting the
height of the exhaust pipe connection.
If during height adjustment the distance was too high between the side panel
and the ground, it can be covered by the enclosed panel. Simply screw off
the appropriate side wall. Attach the panel in the desired position and install
back the side wall.
Knob position 30%:
With the air draught regulator the increased chimney
air draught can be throttled. (for example too high
chimney or weather conditions).
The air draught regulator must not be shuttered in the
heating phase, so that the fuel can burn optimally.
Knob position 100%:
This position is selected in the heating-up phase, as
well as the necessary delivery pressure of the
chimney.
(see „chart for chimney calculation“ page 7)
