1
Small VF
Secure the drill template to the enclosure in the
location specified by the diagram.
X= 24" (61 cm) Y= 53" (135 cm)
Note:
There were a few VF-2YT that had a
stiffener on back panel. These models will
require a spacer and longer bolts that are
included in the kit.
Medium / Large VF
Secure the drill template to the enclosure in the
location specified by the diagram.
Height (Y) = 60" (152 cm)
Place the the drill template on the left [3] side of
the stiffener [2] for these models:
• VF-3YT/50
• VF-5/50XT
• VF-5/50TR
• VF-5/50
For all other models place the drill template on
the right [4] side of the stiffener [2].
Use a 5/16 inch drill bit to drill holes through the
enclosure in the locations marked on the
template.
Coolant Chiller Installation Instructions
Page 4 of 11 pages
