Troubleshooting
(cont)
PRoBLeM: Water is leaking from the Fs-50.
Possible Cause:
1) Your unit’s water tank is overfilled.
Possible Solution:
1) The fill line on the Fill Cup indicates the proper
amount of water needed for the tank, but you may
want to try putting a little less water in the tank.
IMPORTANT
NOTE:
Water should not go above the
level indicator “bar” inside the opening on top of the tank.
PRoBLeM: Fs-50 leaves water on the floor.
Possible Cause:
1) Cleaning pad is saturated.
2) Unit is not level on the floor.
Possible Solution:
1) Turn off unit, unplug from power outlet and change
the cleaning pad as described on pg 10-11.
2) Always keep the FS-50 level and parallel
to the floor.
PRoBLeM: Fs-50 left white spot on the floor.
Possible Cause:
1) The FS-50 left in one spot for too long.
2) The FS-50 was not placed on the Floor
Protector/Resting Mat.
3) Hard water was used in the FS-50.
Possible Solution:
1) Always place your FS-50 on the Floor Protector/
Resting Mat whenever not actively using it.
Never
leave the FS-50 in one spot on any surface for any
period of time.
2) Use distilled water in the FS-50.
NOTE:
To remove the spot, use a damp, dry cloth
with a few drops of white vinegar and rub the
stain to remove spot.
pg 22 877-HAAN DIRECT / 877-422-6347
www.
HAAN
USA.com