How to Use the
Haan
®
Carpet Tray to
Freshen & Sanitize Carpets & Rugs:
IMPORTANT: The Carpet Tray is used
without
the
Ultra-Microfiber Pad. The carpet tray is
an optional accessory that is included
with the FS-50+.
The Carpet Tray enables the Floor Sanitizer to freshen,
deodorize and sanitize carpeting, rugs, and more.
Used with the Floor Sanitizer it kills dust mites and
other allergens in a variety of soft surfaces.
1) The tray attaches directly to the unit by snapping
onto the bottom of the steam head. (Fig 16)
To attach the tray, make sure the high back tabs are
at the back of the unit. (Fig 17) Then simply tilt the
FS-50 so the front of the steam head slips under the
front clips, press down until the back tabs snap
over the back lip of the steam head. (Fig 18) The
tray is made to fit snuggly.
2) After attaching the tray, rest the unit on the Floor
Protector/Resting Mat. Press the Orange ON/
OFF power button to turn your Floor Sanitizer
ON. The GREEN Power ON light will illuminate.
Wait for the Thermal Indicator on the tank cap
to change from black to orange to show the unit
is ready for use.
3) Push and pull the FS-50 Steam Cleaning Floor
Sanitizer slowly across your carpet or rug to
thoroughly freshen and sanitize the fibers with
steam (Fig 19).
NOTE: It is necessary to use the Carpet Tray in order
for the unit to glide smoothly over the carpet.
4) When there is no more water in the tank, the
RED Refill Light will illuminate to indicate a
need to refill before continuing to sanitize.
(Fig 20)
5) Place the unit on the Floor Protector/Resting Mat
and turn your Floor Sanitizer OFF. Unplug the
unit from the electrical wall outlet and wait for
approximately five (5) minutes until the unit cools
down before removing the cap.
Fig 16
Operating Instructions:
(cont)
Fig 17
Fig 18
Using Your Floor Sanitizer
Fig 19
pg12 877-HAAN DIRECT / 877-422-6347
www.
HAAN
USA.com
Back Tabs
Front
Clips
RED Refill
Light
Fig 20