Care & Maintenance
Always be sure that your Floor
Sanitizer is UNPLUGGED from
the wall receptacle prior to
cleaning or before emptying
the Water Tank.
1) Turn your FS-50 off and unplug the unit
from the electrical outlet.
2) Place the unit on the Floor Protector/Resting Mat.
3) Prepare to store the FS-50 by looping the
power cord around the pivoting cord wraps found
on the handle pole and snap the plug securely
onto the cord when complete (Fig 23).
4) Let your FS-50 cool for five (5) minutes
before removing the Ultra-Microfiber Pad.
5) Always empty the Water Tank once you have
finished using your FS-50 and before you
store the unit.
6) Remove the Ultra-Microfiber Pad being used and
wash it in warm water with a mild detergent.
IMPORTANT: Never use bleach or fabric softener
when cleaning the Ultra-Microfiber Pad.
The pad can be washed in a washing machine set
on the gentle cycle. We recommend that you air
dry the pads for 24 hours, but they can also be
dried in a clothes dryer on a low heat setting.
7) To clean the body of your FS-50, wipe it
down with a damp cloth.
8) Store the unit upright in a protected dry area,
standing it on the Floor Protector/Resting Mat,
or hanging it by the Storage Hook (Fig 24a & b).
Any maintenance or service not included
in this manual should be performed by an
authorized service representative.
For questions call the Customer Care Center:
1-877-HAAN DIRECT (1-877-422-6347).
iMPortant
!
i
CaUtion
!
i
Do not immerse your Floor
Sanitizer in water or any
other liquid.
Fig 23
Fig 24
www.
HAAN
USA.com 877-HAAN DIRECT / 877-422-6347
pg 15
b
a
rotates
360˚
Never
leave the appliance in one spot
on any surface for any period of time.
Always place your Floor Sanitizer on
the Floor Protector/Resting Mat when
stationary, and make sure the Floor
Sanitizer is turned off when not in use.
!
i
CaUtion