9
12 Installation
Attention!
When installing the component, choose a
means of attachment that cannot easily be
detached (e.g. riveting or safety screws).
12.1 Preparation
Before beginning installation, ensure that the identification number given in this installation and opera-
tion manual corresponds to the identification number of the component.
Installing the component requires the following items that are
not
included in the scope of the delivery:
HST-M2: built-in version (Ident.-No.: 10788, 10823, 11051, 11215, 12090, 12120, 12188,
12242; 12307)
4 M5 nuts from A2-70
HST-M3 and HST-M4: built-in version (Ident.-No.: 10555, 10844, 10649, 11029, 12077,
12288)
6 M5 nuts from A2-70
HST-M: housing version (Ident.-No.: 10342, 10343, 10358, 10334, 10335, 10503, 10504,
10505, 10554, 10560, 10584, 10818, 10985, 11196, 12170, 12261, 12277)
4 up to max. M6 nuts from A2-70 is required
Screw locking devices (toothed lock washers, disc springs, shaft washers, or screw adhesive)
Clean the work environment by removing dirt, grease and oil.
12.2 General approach
Use suitable tools when installing the component. Otherwise, bolts and nuts may become damaged
and unusable.
When tightening the screws listed in section 12.1, do not exceed the max. tightening torque.
Use the items listed in section 12.1 to secure the screw connections.
