22
14 Operation
Attention!
Never operate the key with extended lever
arms. This may destroy the inner compo-
nents and disable the safety function.
Do not attempt to unlock the component
with objects other than the corresponding
keys.
Do not ever attempt to insert or remove a
key by applying excessive force or with the
aid of a tool (hammer).
14.1 Inserting the key
First insert the key change (position 0) and turn it into position 1 (cf. section 10).
Insert the switch key (position 0) and turn it to position 1 until it stops (cf. section 10).
The locking mechanism locks the switch key.
14.2 Removing the key
If a control voltage of the external monitoring device (e.g. a standstill monitor) is present in the locking
mechanism, lights of the illuminated green push buttons.
Press the illuminated green push button and hold it down. Now turn the switch key at the
same time in position 0 (cf. section 10).
Remove the key.
The key change can be turned and removed in position 0.
15 Maintenance
Attention!
Adapt the frequency of checks to the envi-
ronmental conditions at the application
site.
No maintenance of the internal parts of the
component is required.
We recommend the following maintenance measures:
Check the component at regular intervals (at least once a year) for external damage.
Check the protective caps is securely in place and the seal is functioning.
Damaged or faulty devices must be replaced.
