9
DEUTSCH
ENGLISH
FRANÇAIS
ITALIANO
ESPAÑOL
NEDERLANDS
PORTUGUÊS
SVENSKA
DEUTSCH
ENGLISH
FRANÇAIS
ITALIANO
ESPAÑOL
NEDERLANDS
PORTUGUÊS
SVENSKA
© HAAG-STREIT AG, 3098 Koeniz, Switzerland - HS Doc. no. 1500.7220343.04070 – 7. Edition / 2016 – 11
(Centre point)
(Cross markers)
(Circle)
2.20 Fixation control
The examined eye of the patient is illuminated with IR LEDs, photographed by a
CMOS camera and displayed on the LCD display. The built-in automatic fi xation
control function increases the reliability of the examination results. Precise position-
ing of the examined eye is performed by motorised fi ne adjustment of the chin rest.
2.21 Examination data
All examination data are transmitted via the Ethernet interface to the control unit
(PC / laptop), where they are saved and managed in a database. It is possible to
export data to a server. Examination data can also be printed out on a printer con-
nected to the control unit.
3. Appliance assembly / installation
WARNING!
Do not modify this equipment without authorization of the manufacturer.
Installation and repairs may only be performed by trained specialists.
Contact your HAAG-STREIT representative for installation, repairs and
modification work on the system. The contact details are available at
www.haag-streit.com.
Only original HS replacement parts may be used.
•
•
3.1 Transporting the appliance
Transporting or moving the appliance (only short distances):
a) Unplug the power source before moving the device.
b) Stand in front of the device, grasp the cupola with both hands and lift the device
(Figure 7-1), or
b) Stand to one side of the appliance with one hand on the front cover and with
the other hand on the back cover, then take a fi rm hold and lift the appliance
(Figure 7-2, Figure 7-3).
Figure 7-1
Figure 7-2
Figure 7-3
3.2 Connecting the patient response button
The connection socket for the response button is located at the bottom of the front
cover. The retaining catch on the connection plug of the response button faces for-
wards.
DANGER!
No other cable may be connected to the RJ11 socket other than the
patient response button!
29.
Front cover
30. Cupola housing
31. Connection plug with retaining catch
•
Push the connection plug into the
connection socket until your hear the
retaining catch click into place. To re-
move the response button, push the
retaining catch towards the headrest
and pull the cable downwards.
01-IFU_Octopus900-7220343_04070_eng.indd 9
18.11.2016 14:03:43
