Haag-Streit C.MOR HD Instructions For Use Manual Download Page 9 | Manualshive

Page: 9 / 44

Haag-Streit C.MOR HD Instructions For Use Manual Download Page 9

Haag-Streit AG

Legal Information | 3

1500 4000089 02010_web

9

Maintenance

The device must only be serviced or repaired following the service manual of the surgical micro-
scope system.

Modifications and maintenance must only be performed by persons explicitly authorized by Haag-
Streit. For maintenance only original parts from Haag-Streit as well as approved parts from third-
party suppliers have to be installed. After maintenance or technical modifications, the device must
be readjusted following the service manual of the surgical microscope system.

In case of technical inquiries, the device name, the reference number (

), and the serial num-

ber (

) need to be indicated.

For installation, dismantling and replacement of components, the actual national laws and direc-
tions regarding medical products (e.g. traceability, approval of added components, electrical safety)
have to be followed. In case of doubt, please contact Haag-Streit.

«
...
7
8
9
10
11
...
»

Summary of Contents for C.MOR HD













































Reviews:

No comments