Haag-Streit C.MOR HD, Instructions For Use Manual, Page: 28 / 44

7 | Operation of C.MOR HD and C.MOR HD³ Haag-Streit AG
28 1500 4000089 02010_web
7.3.4 Adjust Video Frequency
Using the
Video Setting
submenu, the output signals for VBS , DVI and HD SDI can be adjus-
ted. For the Y/C signal, no manual setting is possible.
To change settings in the setup menu, the menu lock must be deactivated:
1. Open the
Setup Menu
.
2. Select the menu item
Miscellaneous
.
3. Set the value of the menu item
Menu Lock
to
OFF
.
ð The red lock mark in the menu screen disappears.
4. Select the menu item
Video Setting
.
To adjust the frame rate for the VBS output signal:
5. Set
Format
to the desired value:
–
59.94 Hz
: The VBS signal outputs the NTSC format with a frame rate of 59.94 frames per
second.
–
50 Hz
: The VBS signal outputs the PAL format with a frame rate of 50 frames per second.
To adjust the HD SDI output signal:
6. Set
SDI Setting
to the desired value:
–
1080p
: progressive image transfer of 1080 image lines, without interlaced scanning
–
1080i
: interlaced image transfer of 1080 image lines
To adjust the DVI output signal:
– Set
DVI Setting
to the desired value:
–
1080p
: progressive image transfer of 1080 image lines, without interlaced scanning
–
1080i
: interlaced image transfer of 1080 image lines
7. Confirm the entry by pressing the button [FUNCTION/SET] on the front panel of the CCU.
8. To activate the menu lock, set the value of the menu item
Menu Lock
to
ON
.