13
Figure 7
Local power supply connection
Power over Ethernet (PoE)
When using PoE, you do not need to connect the power interface to a power source. You only
need to connect one end of an Ethernet cable to the Ethernet interface of the AP and the
other end to an Ethernet interface of a PoE switch (for example, Ethernet switch).
If the uplink device of the AP is a PoE switch, use an Ethernet cable to directly connect the
Ethernet interface of the AP to the PoE device (see Figure 8
Figure 8
PoE connection
TIP:
To avoid mistaking the console interface for the Ethernet interface and vice versa, locate the silkscreen
on the device .
Connecting the network
Connect the Ethernet interface of the AP to an Ethernet interface of the switch to implement
internet or MAN (Metopolitan Area Network) access (see Figure 9
Power interface
Power adapter
WA2200
PoE Switch
PC
