44
View
MP-group interface view
Default level
2: System level
Parameters
None
Description
Use the
ppp mp fragment enable
command to enable MP fragmentation.
Use the
undo ppp mp fragment enable
command disable MP fragmentation.
By default, MP fragmentation is enabled.
If the peer device does not support fragment reassembly, you must configure the
undo ppp mp fragment
enable
command on the local router to disable MP fragmentation, thus enabling the two devices to
communicate. After that, outgoing packets are not fragmented, but they still carry an MP sequence
number and fragment tag.
After you configure the
undo ppp mp fragment enable
command on an interface, the settings configured
with the
ppp mp min-fragment
command become invalid on the interface.
After configuring the
ppp mp fragment enable
command, you must use the
shutdown
and then
undo
shutdown
commands to re-enable all the bundled physical interfaces for the new setting to take effect.
Examples
# Disable MP fragmentation on interface MP-group 4/1/28.
<Sysname> system-view
[Sysname] interface Mp-group 4/1/28
[Sysname-Mp-group4/1/28] undo ppp mp fragment enable
ppp mp max-bind
Syntax
ppp mp
max-bind
max-bind-num
undo
ppp mp
max-bind
View
MP-group interface view
Default level
2: System level
Parameters
max-bind-num
: Maximum number of links allowed in an MP bundle, in the range of 1 to 128.
Description
Use the
ppp mp max-bind
command to set the maximum number of links allowed in an MP bundle.
Use the
undo ppp mp max-bind
command to restore the default.
By default, the maximum number of links allowed in an MP bundle is 16. However, up to 12 links can be
brought up simultaneously in an MP bundle.
