9
Error: 0 BIP(B1)
Multiplex section layer:
Alarm: NONE
Error: 0 BIP(B2), 0 REI(M1)
Higher order path layer:
C2(TX): 0x13 C2(RX): 0x13
J1(TX): "h3c"
68 33 63 00 00 00 00 00 00 00 00 00 00 00 00 00
J1(RX): "h3c"
68 33 63 00 00 00 00 00 00 00 00 00 00 00 00 00
Alarm: NONE
Error: 0 BIP(B3), 0 REI(G1)
0 PJE, 0 NJE
Last 300 seconds input: 57615 packets/s, 6387965 bytes/s
Last 300 seconds output: 46113 packets/s, 8852949 bytes/s
Input : 184384723 packets, 18819825504 bytes, 0 buffers
0 errors, 0 crcs, 0 lens, 0 giants,
0 pads, 0 aborts, 0 timeouts,
0 overflows, 0 overruns, 0 no buffer
Output: 60804502 packets, 11674011408 bytes, 0 buffers
0 errors, 0 overflows, 0 underruns
Peak value of input: 0 bytes/sec, at 2010-12-27 06:15:45
Peak value of output: 0 bytes/sec, at 2010-12-27 06:15:45
Table 5
Output description
Field Description
Atm4/1/2 current state
Physical state of the interface
Line protocol current state
Link layer state of the interface
AAL enabled: AAL5, Maximum VCs:
1024
AAL type and the maximum number of VCs allowed on the interface
Current VCs
VCs configured on the interface
Current VPs
VPs configured on the interface
Port connector type
Optical module type of the interface
Physical layer
Framing format of the interface
Port speed type
Transmission rate of the interface
Loopback
Loopback mode of the interface
Clock Source
Clock mode of the interface
Clock grade
Clock grade of the interface
SPE scrambling
Scrambling mode of the interface
BER thresholds
Signal degrade (SD) alarm threshold and signal fail (SF) alarm
threshold of the interface
J0(Rx)
J0 overhead byte expected to receive on the interface
J0(Tx)
J0 overhead byte transmitted by the interface