84
Field Description
Line protocol current state : UP
Link layer state of the MFR interface, which can be:
•
DOWN
—Indicates that the link layer of the
interface is down.
•
UP
—Indicates that the link layer of the interface is
up.
Description : MFR3/1/1 Interface
Interface description.
The Maximum Transmit Unit is 1500
MTU.
Hold timer is 10(sec)
Value of the T391 parameter at the DTE side, in
seconds.
Internet Address is 10.0.35.1/24 Primary
IP address and mask.
link-protocol is FR IETF
Link layer protocol.
LMI DLCI is 0, LMI type is Q.933a, frame relay DCE
DLCI number used by LMI, LMI type, port type and
operating mode.
LMI status enquiry received 452, LMI status sent 452
The number of transmitted LMI Status-Enquiry
messages and that of the received LMI Status
messages.
LMI status timeout 0, LMI message discarded 0
The number of LMI Status messages that timed out and
the number of dropped LMI messages.
Physical is MFR
Physical interface is MFR.
baudrate
Baudrate of the MFR interface.
Last clearing of counters
Time when the interface statistics were last cleared
The output
Never
indicates that the interface statistics
have never been cleared.
Last 300 seconds input rate
Input rate of the interface within the last five minutes.
Last 300 seconds output rate
Output rate of the interface within the last five minutes.
2263 packets input, 26840 bytes, 0 drops
Number of packets and bytes received on the
interface and packets dropped as the result of full
receive buffer.
113305 packets output, 12908653 bytes, 0 drops
Number of packets and bytes transmitted on the
interface and packets dropped as the result of full
transmit buffer.
The brief information of interface(s) under route mode Brief information about Layer 3 interfaces.
Link: ADM - administratively down; Stby - standby
Link status:
•
ADM
—The interface has been administratively
shut down. To recover its physical state, perform
the
undo shutdown
command.
•
Stby
—The interface is operating as a backup
interface.
Protocol: (s) - spoofing
If the network layer protocol state of an interface is
shown as UP, but its link is an on-demand link or not
present at all, its protocol attribute includes the
spoofing flag (an
s
in parentheses).
Interface
Abbreviated interface name.
