
44
Step3
If you do not install a new interface module in the slot, install two blank panels. To install a HIM, see
“
Replacing an MIM
Follow these steps to replace a MIM:
Step1
Use a flat-blade screwdriver to loosen the captive screws of the MIM to be removed.
Step2
Gently pull the MIM out of the slot along the slide rails.
Figure 35
Pull the MIM out of the slot
Step3
If you do not install a new interface module in the slot, install a blank panel. To install a MIM, see
“
Replacing a CF card
Follow these steps to replace a CF card:
Step1
Make sure that the CF card LED is not blinking.
Step2
Press the CF card eject button so that the eject button protects from the panel.
Figure 36
Press the eject button
Step3
Press the eject button again to eject the CF card part way out of the slot, and then pull the CF card out
of the slot.