16
Figure 16
Push the MIM into the slot
Step3
Use a flat-blade screwdriver to fasten the captive screws on the MIM.
Step4
Power on the router and check the status LED on the front panel.
On
means the MIM is installed correctly
and running properly.
Off
means the MIM has failed the POST.
NOTE:
HIMs are hot swappable and you must perform the
remove slot
number command to stop the module
before you remove it.
Installing a CF card
Follow these steps to install a CF card:
Step1
Make sure that the CF card status LED is not flashing.
Step2
Push the CF card eject button all the way into the slot, and make sure that the button does not project from
the panel.
Step3
Insert the CF card into the slot following the direction shown in
, and make sure it does not
project from the slot.
Figure 17
Insert the CF card into the slot