18
Figure 18
Remove the dust cover
Step2
Plug one end of the optical fiber into the transceiver module in the switch, as shown in
Figure 19
Install the transceiver module
Step3
Remove the dust cover on the transceiver module.
Step4
Plug the LC connectors on one end of the fiber cable into the Rx and Tx ports, and plug the LC connectors
on the other end to the Tx and Rx ports on the peer device, as shown in
.
Figure 20
Connect the fiber connectors
Step5
Check whether the LEDs of the optical interfaces are normal. For more information about the LED status,
see “
.”