
34
[SLOT 1] MIM-4SAE (Hardware)2.0, (Driver)1.0, (Cpld)2.0
[SLOT 2] The SubCard is not present
Displaying operational statistics of the router
When you perform routine maintenance or the system fails, you may need to display the operational
information of each functional module for locating failures. Generally, you need to run the
display
commands one by one. To collect more information one time, you can execute the
display
diagnostic-information
command in any view to display or save the operational statistics of multiple
functional modules of the router. This command displays the output of the
display clock
,
display version
,
display device
, and
display current-configuration
commands.
•
Save the operational statistics of each functional module of the router.
<Sysname> display diagnostic-information
Save or display diagnostic information (Y=save, N=display)? [Y/N]:y
Please input the file name(*.diag)[cfa0:/default.diag]:aa.diag
Diagnostic information is outputting to cfa0:/aa.diag.
Please wait...
Save succeeded.
Execute the
more aa.diag
command in user view, and then press the
Page Up
and
Page Down
keys to
view the contents of the file
aa.diag
.
•
Display the operational statistics of each functional module of the router. The output is too much and
omitted here.
<Sysname> display diagnostic-information
Save or display diagnostic information (Y=save, N=display)? [Y/N]:n
=================================================
===============display clock===============
=================================================
08:54:16 UTC Fri 11/12/2010
===================================================
===============display version===============
===================================================
Omitted
Displaying detailed information about interface modules
Use the
display device verbose
command to display detailed information of interfaces modules in each
slot.
<Sysname>display device verbose
System-mode(Current/After Reboot): Normal/Normal
Slot No. Card Type Status Max Ports
--------------------------------------------------------
0 Fixed SubCard Normal 6
1 MIM-4SAE Normal 4
2 N/A Absent N/A
Use the
display device slot
slot-number
command to display detailed information about the interface
modules in the specified slot.
<Sysname> display device slot 1
System-mode(Current/After Reboot): Normal/Normal