51
SAP-20GE2XP
The SAP-20GE2XP provides 16 SFP ports, four combo interfaces, and two SFP+ ports. It provides a
bi-color LED for each port to indicate the operating status of the port. It also provides a RUN LED to
indicate the operating status of the module.
Front panel
Figure 36
Front panel
(1) SFP ports (GE0 to GE15)
(2) Combo interfaces (GE16 to GE19)
(3) SFP+ port 0
(4) SFP+ port 1
(5) Operating status LED (RUN)
Specifications
Table 59
SAP-20GE2XP specifications
Item Specification
Flash 8
MB.
Memory type and size
•
Default
—Two 2-GB DDR3 SDRAMs.
•
Maximum
—Four 2-GB DDR3 SDRAMs.
NVRAM 128
KB.
SFP ports
16 × SFP ports, 100/1000 Mbps auto-sensing.
The following transceiver modules are available for the SFP ports:
•
100 Mbps SFP transceiver modules.
•
1000 Mbps SFP transceiver modules.
•
100/1000 Mbps SFP transceiver modules.
•
SFP-T copper transceiver modules (The SFP port supports
10/100/1000 Mbps auto-sensing when used with this transceiver
module.)
Combo interfaces
Four.
•
Copper port
—Straight-through/crossover autosensing:
{
10/100 Mbps, half/full-duplex.
{
1000 Mbps, full-duplex.
•
Fiber port
—1000 Mbps, full-duplex.
10G SFP+ ports
2.
Hot swapping
Supported.
Max power consumption
•
Tested
—128 W.
•
Theoretical
—150 W.
