H3C SecBlade, User Manual

Page: 81 / 85

74
• Add interface GigabitEthernet 4/0/1.
•
Click Apply .
# Add an external security zone.
•
Click Add .
• Type zone2 as the name.
• Add interface GigabitEthernet 4/0/2.
•
Click Apply .
# Add segment 0.
•
Select System Management > Network Management > Segment Configuration , and click Add
Segment , as shown in Figure 58 . Perform the following operations on the Add Segment page, as
shown in Figure 59 .
Figure 58 Segment configuration
Figure 59 Add a segment
•
Select 0 from the Segment No drop-down list.
•
Select zone1 from the Internal Zone drop-down list, and zone2 from the External Zone drop-down
list.
• Select Ten-GigabitEthernet2/0/1 from the Internal Interface drop-down list.
•
Click Apply .
# Add a rule for URL Filter Policy , which is the default URL filtering policy.
•
Select URL Filtering > URL Filtering Rules , and click Add , as shown in Figure 60 . Perform the
following operations on the Add Rule page, as shown in Figure 61 .