34
[Sysname-GigabitEthernet3/1/1] quit
[Sysname] interface GigabitEthernet4/1/1
[Sysname-GigabitEthernet4/1/1] packet-filter inbound link-group 4000
[Sysname-GigabitEthernet4/1/1] quit
2.
Configure the SecBlade IPS cards
# Configure an IP address for the management interface and enable the management interface. This
configuration is optional. By default, the IP address of the management interface is 192.168.1.1. You can
also change this IP address through the web interface.
[Sysname] interface meth0/2
[Sysname-if]ip address 192.168.0.21 255.255.255.0
[Sysname-if] undo shutdown
[Sysname-if] quit
# Log in to the web interface of the SecBlade IPS cards using default user name
admin
and default
password
admin
.
Figure 20
Log in to the SecBlade IPS card web interface
# Select
System Management > Network Management > Interface Swap Table Configuration
. Click
Add
Interface Swap Entry
. Select
0
for
Index
, and
xeth0/0
for
Interface 1
and
Interface 2
, and click
Apply
& Activate
, as shown in
Figure 21
.
Figure 21
Interface swap table configuration for the SecBlade IPS cards
Summary of Contents for SecBlade
Page 7: ...ii Index 78 ...
