63
To do…
Use the command…
Remarks
Specify permitted
VLANs on the trunk
port
port trunk permit vlan
{
vlan-id-list
|
all
}
Required
A trunk port can allow packets of
multiple VLANs to pass. If you use the
command repeatedly on the
interface, all the specified VLANs are
permitted.
Configure the
extended port
connection mode
for the trunk port
port connection-mode extend
Required
Disable MAC
address learning on
the 10GE interface
mac-address max-mac-count
0 Required
Return to system
view
quit
Required
Save all configurations
save
[
file-name
| [
safely
]
Required
Configuring the SecBlade IPS card
Perform the following configurations on the SecBlade IPS card:
•
Configure an IP address for the management interface through the CLI and use the IP address to log
in to the web interface of the SecBlade IPS card.
•
Configure the internal interface and the OAA client and test the connectivity between the OAA
client and the router.
•
Create security zones and add the interfaces of the router to the security zones.
•
Create a segment and add the internal zone and the external zone to the segment.
Table 6
Follow these steps to configure the SecBlade IPS card:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter management interface
view
interface meth
interface-number
Optional
Configure an IP address for
the management interface
ip address
ip-address mask
Optional
By default, the IP address of the
management interface Meth 0/2
is 192.168.1.1.
Enable the management
interface
undo shutdown
Required
Enabled by default.
Use the IP address of the
management interface to log
in to the web interface of the
SecBlade IPS card
—
Required
The default username and
password are both
admin
.
Summary of Contents for SecBlade
Page 7: ...ii Index 78 ...
