330
To do…
Use the command…
Remarks
Step 1
Enter system view
system-view
––
Step 2
Enter RIPng view
ripng
[
process-id
]
––
Step 3
Configure a filter policy
to filter incoming routes
filter-policy
{
acl6-number
|
ipv6-prefix
ipv6-prefix-name
}
import
Required
By default, RIPng does
not filter incoming
routing information.
Step 4
Configure a filter policy
to filter outgoing routes
filter-policy
{
acl6-number
|
ipv6-prefix
ipv6-prefix-name
}
export
[
protocol
[
process-id
] ]
Required
By default, RIPng does
not filter outgoing
routing information.
Configuring a priority for RIPng
Routing protocols have their own protocol priority used for optimal route selection. You can set a
priority for RIPng manually. The smaller the value, the higher the priority.
To do…
Use the command…
Remarks
Step 1
Enter system view
system-view
—
Step 2
Enter RIPng view
ripng
[
process-id
]
—
Step 3
Configure a RIPng
priority
preference
[
route-policy
route-
policy-name
]
preference
Optional
By default, the RIPng
priority is 100.
Configuring RIPng route redistribution
To do…
Use the command…
Remarks
Step 1
Enter system view
system-view
––
Step 2
Enter RIPng view
ripng
[
process-id
]
––
Step 3
Configure a default
routing metric for
redistributed routes
default cost
cost
Optional
The default metric of
redistributed routes is
0.
Step 4
Redistribute routes from
another routing
protocol
import-route
protocol
[
process-
id
] [
allow-ibgp
] [
cost
cost
|
route-policy
route-policy-name
]
*
Required
No route redistribution
is configured by
default.
Summary of Contents for S9500E Series
Page 435: ...435 ...
