Examples
en-GigabitEthernet 2/0/1 on the switch operating in standalone mode to IRF
en-gigabitethernet 2/0/1
et 2/2/0/1 on
net2/2/0/1] quit
[Sysname-irf-port 2/1] port group interface ten-gigabitethernet 2/2/0/1
t 2/1] quit
do shutdown
set irf slot member-id
mode
f slot
slot-number
member-id
member-id
irf chassis
chassis-number
slot
slot-number
member-id
member-id
View
Default le
Paramete
slot-number
: Specifies a standby MPU by its slot number. Use this option when your switch is
ating in standalone (the default) mode.
er-id
: Specifies the member ID of the target switch.
assis
chassis-number
slot
slot-number
: Specifies the member ID of the IRF member switch, and the
y the
Descripti
f the
Examples
# Set the member ID of the MPU in slot 1 to 1 when the switch operates in standalone mode.
<Sysname> set irf slot 1 member-id 1
# Bind physical IRF port T
port 1.
<Sysname> system-view
[Sysname] irf-port 1
[Sysname-irf-port 1] port group interface t
# When the switch operates in IRF mode, bind physical IRF port Ten-GigabitEthern
member 2 to IRF port 1.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 2/2/0/1
[Sysname-ten-gigabitethernet2/2/0/1] shutdown
[Sysname-ten-gigabitether
[Sysname] irf-port 2/1
[Sysname-irf-por
[Sysname] interface ten-gigabitethernet 2/2/0/1
[Sysname-ten-gigabitethernet2/2/0/1] un
Syntax
Standalone
set ir
IRF mode
set
User view
vel
2: System level
rs
slot
oper
member-id
memb
ch
slot-number
argument represents the number of the slot that holds the standby MPU. You can displa
member ID and slot number with the
display device
command.
on
Use the
set irf slot member-id
command to specify the me
pecified switch.
mber ID of the MPU in the specified slot o
s
28
